The mIRC Resource Center.
provided by the operators of DALnet #mIRC.

[ Main | What's New | Technical | Scripts | Links ]

DCC Help Page

DCC allows you to connect directly to another IRC client, instead of going through the IRC Network, to Send and Get files, and to Chat privately over a more secure connection. By default, mIRC will pop up a dialog asking you if you want to accept the file, however if you select the Auto-get file option then mIRC will automatically accept the file. If you select Ignore All then all incoming dcc send requests are ignored. If you choose to accept the file, mIRC will ask the sender to begin the file transfer, at which point you should begin receiving the file. If someone tries to send you a file that already exists in your get directory then you will be shown a warning that the file exists. You then have the option to either overwrite the file, resume the transfer, or rename the file. If you choose to overwrite the file then the whole file will be downloaded from the beginning and any existing file of the same name is erased. If you select resume then mIRC will attempt to negotiate a transfer resume to get the remaining part of the file.

There are many causes that can lead to DCC send errors, but to start out, you need to understand the basics. When you DCC someone, the following process takes place:

  1. You send a notice to the person sending to:
    -Yournick- DCC Send filename (YOURIPADDRESS)

  2. Their mIRC initiates a connection to YOURIPADDRESS

If YOURIPADDRESS is incorrect, then the transfer will never take place - it's trying to goto an address that isn't assigned to you. Also if you are running any type of software (or your ISP is) that controls/monitors incoming connections, this may not allow the user to get through to you. This software is known as firewalls, proxies, wingates, ICS, and other multiple PC internet connection supporting software.

This is also why you are able to receive but not send - think of the connection process backwards... when you send a file, the other user connects to you, when someone sends you a file, you are connecting to them.

Built into mIRC 5.71 and newer, is a command called /localinfo -uh. It's describe in the help file as:

/localinfo -uh [host ip]
Looks up and sets your local info settings. The -u switch performs a /userhost lookup, the -h switch does a normal lookup. If you wish, you can also set the local info manually by specifying the host and ip values.

Note: This process isn't flaweless and doesn't always solve the problem, read on for more help.

If you see the message Unable to resolve Local host with the 32bit version of mIRC, the problem might be related to using a 16bit winsock, so you should try out the 16bit version of mIRC to see if it works for you (or download a 32bit winsock) at

If you type the command /localinfo -u mIRC will automatically fix an IP mismatch. Now wait, a common misconception is that you need to reconnect to IRC - and it's wrong.... you don't. Why not? Well we're just simply having mIRC correct your IP address that is used in the DCC send process. If you are afraid of typing new commands (because, you know, its not a good idea to type everything someone tells you to)you can find an explanation of this command in mIRC's help file by typing in any mIRC window: /help /localinfo

or you can use this method:

  1. Type: //echo 2 $ip

  2. Type: //dns $me
    You may not be able to get a reply to the DNS command, which means your address is numeric (and your names server is down). Simply compare your numeric address Yournick!identd@numericaddress with the //echo 2 $ip data. If the two numbers don't match press alt E, goto the local info tab, put the resolved address in Ip address block click on connect always get local host.

  3. Try to DCC Send a file to someone.

Lastly, you need to make sure the person you're sending to has their mIRC setup... have them type /sreq and it should reply something along the lines of:

*** DCC Send requests pop up a dialog
*** DCC Send requests are auto-accepted

You do not want them to have:

*** DCC Send requests are ignored

If they have the ignore return, have them type /sreq ask. Then re-initiate the DCC send.
On another note: It sounds stupid but a full harddisk very effectively blocks DCC getting files!

If none of this works for you, proceed to sections that might apply to the type of connection/software you are using. And remember, you should always have:

'On connect, Always get' Local Host and IP Address options in the Local_Info dialog checked
Set Lookup method to Normal.

If none of the other sections help you, you may try changing the lookup method to server. Make sure that your time-out values in DCC/Options are set large enough. "Get/Chat Dialog time out after" and "Send/Get Transfer time out after" are recommended to be set to at least 60 and 120, respectively.

With the Normal method, mIRC relies on your winsock to reply with the correct information. With the Server method, mIRC looks up your local host through the IRC Server, and then performs a /dns on it to resolve it to an IP address. The Server method will most likely be slower, you can tell when it has been completed when you see your local host name and IP address displayed in the status window. Note: If changing the above switches still doesn't solve the problem, or you don't know what to enter for your local host or ip address, contact your internet provider or system administrator.

If you use TIA (The Internet Adapter) or Twinsock, at this point you cannot use DCC send or initiate DCC chat (with any IRC client, not just mIRC). You may want to try SLiRP or vTCP. SLIRP was the first SLIP emulator to allow DCC sending and initiating DCC chat. (As you know DCC get should always work fine, whatever connection you have. Besides firewall blocking you that is.) Virtual TCP is tested and proofed to allow DCC sending and chatting. More info and

With SLiRP ( set File/Setup/Local_Info/ 'always get local host' on connect to Active, IP Address should be the fake IP used for SLiRP ( usually). Then DCC Send, Chat, and everything else should work perfectly fine, even on Windows95/98/2000 with the Dial-Up Networking.

If you have dynamic IP (your IP address is different each time you log on), make sure that "On connect, always get:" in the File/Setup/Local_Info dialog is set to get the Local Host and IP Address. If these were already set to ON make sure the correct 'local host' name and 'IP Address' are found by mIRC... on some winsocks this is rather tricky... If you have a non-compliant stack, mIRC may not be able to correctly find your local host (domain name) and IP. With dynamic IP addressing you are in trouble then !! DCC file sending and initiating a DCC Chat (contrary to file getting and accepting a DCC Chat) requires that mIRC knows your correct IP number. Even without an IP number at all, mIRC will work as far as normal chatting is concerned, but won't allow DCC file sending or initiating a DCC Chat.

If you have a non-compliant stack, mIRC may not be able to correctly find your local host (domain name) and IP. In the File/Setup/Local_Info dialog, uncheck the options to "Always get the 'Local Host' and 'IP Address" and manually enter your correct Local Host and IP.

A known Windows95/98/2000 bug causes some people to report that mIRC (and any other IRC program) gets/finds the old (now wrong) Local Host name and/or IP Address after switching Internet provider. This blocks their capability of DCC Sending files and Initiating DCC Chats. If, for some reason, no matter what you do, mIRC picks the user ID (Local Host name) from the Internet Service Provider that you no longer wish to use this is fixable by editing the registry. If you open Regedit and look at MyComputer \HKEY_LOCAL_MACHINE \System \CurrentControlSet \Services \VxD \MSTCP you will see the Domain and NameServer fields from your old provider. These fields will persist even if you uninstall Dial-Up Networking and re-install and go through the TCP/IP settings again ! The best way to solve the described problem is going to Start/Settings/Control_Panel/Network/ double click on TCPIP/ select DNS_Configuration/ and set the HOST field to the hostname (ID) you have on your new provider.

Some people experience DCC File Send problems with mIRC on a windows system with Norton Desktop installed. mIRC then suddenly shuts down completely (sometimes with an error message) as soon as you try to select a file to send. The problem is that Norton Desktop's feature called 'File Assist' conflicts with mIRC's DCC Send dialog. If you shut off File Assist entirely it will allow DCC transfers fine. Even just disabling the "3D look and feel" in the File Assist options menu helps already.

If you use Windows95/98/2000 mIRC allows you to send long file names with spaces in them, but other IRC programs very often cant handle this. This might cause your transfers to fail. You might want to select mIRC's option to fill (up) spaces in such a long file name by an underscore.

Another program known to give DCC Send problems is a software package called Long File Names by View software. It is something you might be running in the background and you might never think of it as the cause of your troubles. The problem is that when you use the DCC Send option in mIRC, the dialog that pops-up doesnt allow you to select files so you can't send anything. Selecting files is blocked by LFN and if you disable the LFN software all your DCC problems will be solved.

The DCC protocol doesn't take into account the possibility of a filename containing spaces, so most if not all IRC clients will incorrectly interpret the following DCC Send message:

PRIVMSG nick :DCC SEND This is a long file name with.spaces in it ipaddress port filesize

Thus mIRC gives you the Fill Spaces option; this fills spaces in a filename with the underscore character _, which should then allow other clients to interpret the message correctly. So other clients would see:

PRIVMSG nick :DCC SEND This_is_a_long_file_name_with.spaces_in_it ipaddress port filesize

If the Fill Spaces option isn't selected then mIRC sends "Long File Names with.Spaces in them" enclosed in quotes. For example:

PRIVMSG nick :DCC SEND "This is a long file name with.spaces in it" ipaddress port filesize

As far as I know, only mIRC can send and receive messages of this form (and only versions 3.8 and onwards), so if you try using this dcc send message with other clients it probably won't work.

As far as I understand it is totally impossible to get DCC Sending working when you're behind a proxy. You may try the DCC Server section.

Many mIRC users IRC from different places, but it's important for you to be aware that some network administators protect their server by not allowing incoming connections. This can be done with firewalls and such on the server side, and cannot be overridden by end users. Most suffer from not being able to DCC send, the only other option is to get the admin to allow incoming connections, or refer to the DCC server section.

  1. Packet Size
    The packet size is the number of bytes that mIRC will send to another client in one packet. The minimum is 512, the maximum is 8192.
    command: /dcc packetsize 8192

    Note: Some sources indicate using 8192 as a packetsize may fragment your file.

  2. Fill Spaces
    The fill spaces option is only available in the 32bit version and only under operating systems that allow spaces in filenames. It is highly recommended that you leave this option turned on. For more information read this.
    command: check Fill spaces after typing /dcc send

  3. Fast Send
    Turning on this option should speed up your DCC sessions.
    command: /fsend on

  4. Pump DCC
    Basically it just sends N bytes ahead of sent data without waiting for the other client to reply "Acknowledged"
    In 5.7 you can only do /pdcc on | off, specifying a number makes no difference now. Nearly every user will never be able to send more than 25000 ahead, this is due to the limitations of current system mediums and bandwidth.
    command: /pdcc on

    Note: 99999999999 is just ignored

  5. Modems
    The faster the modem, the quicker the send - be aware that the send steps down to the speed of the slowest modem in use.

DCCALLOW - A new system that prevents the spread of executable or dangerous scripts without the permision of the user recieving them. The DCCALLOW system prevents transmission of "exe", "com", "bat", "dll", "ini", "vbs", "pif", "mrc", "scr", "doc", "xls", "lnk", "shs", "js" and "pl".
command specifics: /DCCALLOW [<+|->nick[,<+|->nick, ...]] [list] [help]

You would see a message like this (if trying to send a file of this type):

The user Somenickname is not accepting DCC sends of filetype *.EXE from you. Your file filename.exe was not sent.

And Somenickname would receive:

-Servername- Yournickname (address) has attempted to send you a file named filename.EXE, which was blocked.
-Servername- The majority of files sent of this type are malicious virii and trojan horses. In order to prevent the
spread of this problem, we are blocking DCC sends of these types of files by default.

If you completely trust this person, you would type /dccallow +nickname and you will see:

nickname has been added to your DCC allow list

After you have finished your file transfer, it is wise to remove them from the list, by typing /dccallow -nickname and you will see:

nickname has been removed from your DCC allow list

You may list your allowed users by typing:

/dccallow list

You will receive:

The following users are on your dcc allow list:
nickname (address)
End of DCCALLOW list

This is how you can bypass the reverse method of DCC. The receiving user must have DCC server on and listening for the appropriate type of DCC you intend on sending.
usage: /dccserver [+|-scf] [on|off] [port]
example: /dccserver +scf on 59

The mIRC DCC Server listens for direct connections to your IP address from other mIRC clients. In options (alt D, o) , you can set the following:

Enable DCC Server
This turns the DCC Server on or off.

Listen on Port
The DCC Server listens on port 59 by default, however you can change this to another port number.

Listen for...
You can have the DCC Server listen for only certain types of connections, such as DCC Sends, Chats, or Fileserver requests. For example, if you turn off the DCC Chat listen option, the DCC Server will ignore any chat requests.

Perform DNS lookup
When someone connects to your DCC Server only their IP address is available for identification. If you check the DNS lookup switch, mIRC will perform a /dns on the IP address to try to resolve it to a named address. Note: It can take anything from a second to more than minute to resolve an address depending on network conditions, and sometimes it may not resolve at all. You can Send/Chat to the DCC Server using the DCC Send/Chat dialogs and specifying an IP address instead of a nickname.

To send, you use an IP address instead of a nickname to initiate a connection
usage: /dcc [send|chat|fserve] IPADDRESS:PORT

The IP address can be numeric or alphanumeric, to obtain this data do a whois on the person you want to send the file to. You will see the following (unless you are using a script that filters this data differently):

nickname is user@host * "a fancy saying"
nickname on #somechannel
nickname using someserver@somenetwork "a fancy saying"
nickname End of /WHOIS list.

The first line is what we are concerned with. See the user@host part? the host section (whatever is after @) is where you are going to DCC to. You'll want to use whatever port they have setup when they enabled their DCC server. To send a file to the user, type:

/dcc send host:port
example:/dcc send this is alphanumeric)
example: /dcc send 100.200.300.4:59 (this is numeric)

Note: Either host type is just as efficient as the other. /dcc fserve only works for IP address connections and does not work via IRC.

From FAQ at khaled's site:
"Although mIRC has a file-server, it is simple and crude, and was designed years ago for basic personal use, to allow individuals to share files with friends, family, and colleagues, and is nothing like the sophisticated and dedicated file-sharing systems in existence today, which are specifically designed to facilitate the sharing of files on a mass scale."

The syntax to set up a DCC server connection to somebody is:

/fserve <nick> <max gets simultaneously allowed> <homedir> [welcome file]

"Max gets" is so that the other person doesn't bring down your machine with too many parallel gets. 4 is probably a reasonable number. The other person will have access to his homedir and all dirs DOWN in the directory tree from that homedir on. "Welcome file" is a text file you can write and specify that will welcome users to your file server. It's optional.

/fserve Krejt 3 c:\temp\serve c:\temp\serving\welcome.txt
/fserve Mookies 2 c:\outgoing c:\network\mirc\welcome.txt
/fserve Friend 7 c:\

Keep in mind that you can't set up a server to yourself... you need others to test your server...
Typing help in the file server will show the available commands, which are styled after Unix and DOS. "ls" or "dir" will show a directory listing, for example. Even switched commands like "ls -k" (show file sizes in kilobytes) and "dir /w" (show a wide directory listing) work. The server supports all normal ftp commands like cd <dir> , cd.., dir, ls, get, .... but NOT put, hash, upload etc. There is no possibility to delete files in a server connection. Safety risks are none or minimal due to the major restricting of available commands.

Of course, the /fserve command can be used in your Remote section....
Set up a simple Tools/Remote/command like :

ctcp 1:server:/fserve $nick 3 c:\temp\serve

Set the commands to active (type: /remote on) and off you go....

Other people only have to type: /ctcp yournick server to activate the server. You can't set up a server to your own mIRC!! So, others have to test your server !! In the directory c:\temp\serve, you place all files other people are allowed to get from you. The people using your server will have access to the c:\temp\serve directory AND ALL directories BELOW it.. like c:\temp\serve\games.

NEVER NEVER NEVER accept a DCC chat or file send from someone you do not know or trust!!! This is the cause of 95% of all IRC security problems. In the mIRC DCC options section, set DCC Chat and Send to "ASK". Never have the Auto Get option checked

In short; Trojan horse attacks are attractively disguised files that you download and run, resulting in harmful and dangerous consequences ranging from takeover of your IRC channels, erasing of your hard disk, theft of your account passwords, etc. These (Trojan) virusses are not mIRC or IRC specific, they just spread like fire on IRC.

Trojans are typically files with suffices like "ini", "exe", or "com", such as "dmsetup.exe" or "script.ini". These days nearly all trojans are spread in the guise of a free game, handy tool or other software. You probably downloaded one from a WWW or FTP archive, ICQ file exchange, or through IRC's DCC file transfer (by manual /dcc get or, even worse, an "auto DCC get" feature which allows anybody to send you anything, including not only trojans but also other viruses, child porn, etc).

Typically the Trojan needs to be run manually at first (by you), and then installs hacked files all over your disk silently. There are many different versions of those files, but almost all of them interfere with your mIRC placing backdoors in scripts. The files then auto-send themselves (using an 'ON JOIN' event) to everyone who joins the same channel as an infected user without the users knowledge.

On DALnet is a channel specifically for helping users with virii/trojan help. It's called #Nohack you can get there by connecting to dalnet with mICR, and, once on the network, typing: /join #nohack.

As an alternative you can visit the nohack website at:
At this site the best help for problems like this is concentrated and organised by people who are on IRC 24/7, in the Help channels and alike. Read to learn all about the virusses on IRC, mostly called Worms or Trojans, that might tackle you.

Prevention: NEVER download files from people or sites which you aren't 100% sure about. Never use the "auto DCC get" feature, and always scan your DCC gets with a decent virus scanner. Note that mIRC by default does NOT accept files from strangers. This has never been otherwise either. If you accepted files by the "auto DCC get" feature in mIRC, you have switched this option ON yourself, really. Do not, never ever, accept anything you have not requested. Do not accept anything from someone you don't know, no matter how attractively packaged.

free hit counter

[ Main | What's New | Technical | Scripts | Links ]

Copyright © #mIRC-DALnet
These pages are best viewed with Microsoft IE 4.0+ in 800 X 600 or greater.